OUR PRODUCTS

Floor Transport Systems

The sliding conveyor technology is suitable for transporting heavy goods placed on skids or pallets.

Our floor conveyor technology ensures an efficient and smooth handling of our customers' products. Our robust systems guarantee reliable and trouble-free operation at a low maintenance cost.

EMS Overhead Conveyor Systems

Electric Monorails Systems (EMS) are suspended transport systems, their trolleys are equipped with individual drives. Any position on a fixed rail system can be approached by using proximity switches or barcodes attached to the track. The system can be expanded with switch junctions and vertical lift stations.

Programmable Hoist Conveyor Systems

Programmable hoist or overhead crane systems are typically used in dip painting lines when multiple dip tanks are used one behind the other. Various programmable hoists transports a carrier/basket from the entrance of the system through each immersion stage and at the end drops it off on the curing oven conveyor chain.

Overhead Chain Conveyor Systems

Closed loop overhead chain conveyors are used for internal material flow in all areas of industry and commerce.

P&F systems provides the highest level of flexibility for chain conveyor systems. These chain system could be used where the conveyor network is spread over several floors, at fast transfer speed or with low and constant motion, products will be transported from zone to zone regardless of the process conditions.

Floor Transport Systems

The sliding conveyor technology is suitable for transporting heavy goods placed on skids or pallets.

Our floor conveyor technology ensures an efficient and smooth handling of our customers' products. Our robust systems guarantee reliable and trouble-free operation at a low maintenance cost.

Skid or pallet conveyor systems represent a combination of various conveyor elements. This combination allows the flow of materials with a wide variety of paths and near-silent travel.

We can offer our customers a bespoke, space-saving transport system. The modular design of the individual components means that future expansions can be implemented without any problems, as well as modifications to the system, so that the production downtime required for such expansions or modifications is reduced to a minimum.

Transfer stations and tilting or turning devices are additional conveyor elements with which our skid or pallet transport systems can be equipped. Handling a product through different levels within a production hall is also possible through the use of eccentric tables, scissor tables or lifting stations (elevators). Roller rail conveyors, cross conveyors, as well as 90° and 180° rotary tables, are also essential elements used in such a system.

Our range of skid / pallet conveyors includes:

  • Belt lift stations
  • Chain lift stations
  • Chain lift stations for high temperature environments
  • Hoist lift stations for goods
  • Gravity roller conveyors
  • Motorized roller conveyors
  • Swing tables (90°)
  • Turn tables (180°)
  • Scissor lift tables
  • Eccentric lifting tables
  • Chain conveyors
  • Accumulating chain conveyors
  • Accumulating belt conveyors
  • Cross transfer chain conveyors
  • Cross transfer belt conveyors

EMS Overhead Conveyor Systems

Electric Monorails Systems (EMS) are suspended transport systems, their trolleys are equipped with individual drives. Any position on a fixed rail system can be approached by using proximity switches or barcodes attached to the track. The system can be expanded with switch junctions and vertical lift stations.

Modern control systems solve the most complicated processes. With the EMS controllers you can perform timed driving for assembly processes, branching, entry and exit, sorting, stacking, buffering and other tasks. In between the working stations the trolleys can advance on high speeds up to 40 m/min.

Depending on the customer’s requirements or circumstances, the rail system can be suspended from the hall ceiling or from floor mounted steel structure portals.

The classic Electrified Monorail System technology has a wide range of applications and has been used over decades in a wide variety of industrial sectors. The connection of production lines or cells, the transport of goods for storage or picking stations or the in-line production of goods are common applications for this type of transport system.

EMS systems with their electromagnetic or laser tracking readers work efficiently and rationally for a wide range of speeds offering exact positioning,. EMS systems are quit and clean with a high degree of functionality at low maintenace. They can be individually adapted to any transportation task.

Programmable Hoist Conveyor Systems

Programmable hoist or overhead crane systems are typically used in dip painting lines when multiple dip tanks are used one behind the other. Various programmable hoists transports a carrier/basket from the entrance of the system through each immersion stage and at the end drops it off on the curing oven conveyor chain.

Programmable hoist or overhead crane systems are typically used in dip painting lines when multiple dip tanks are used one behind the other. Various programmable hoists transports a carrier/basket from the entrance of the system through each immersion stage and at the end drops it off on the curing oven conveyor chain.

The respective process times for each tank are controlled individually and automatically by a program in the PLC. The hoists work in cycles through the paint line and feeding all the tanks vertically.

Overhead Chain Conveyor Systems

Closed loop overhead chain conveyors are used for internal material flow in all areas of industry and commerce.

P&F systems provides the highest level of flexibility for chain conveyor systems. These chain system could be used where the conveyor network is spread over several floors, at fast transfer speed or with low and constant motion, products will be transported from zone to zone regardless of the process conditions.

Power & Free Chain

Closed loop overhead chain conveyors are used for internal material flow in all areas of industry and commerce. With these systems you can achieve an optimal technical and economic solution for your internal transportation needs.

This system is very easy to install and is suitable for horizontal and vertical transport. It consists of an endless chain that unrolls on the lower part of an open rail. Individual slings are attached to the chain, which in turn transports the products. The chain generally runs at a constant speed.

 

Power & Free Chain Conveyor Systems

P&F systems are an ideal solution for transportation tasks that require flexibility. P&F systems are similar to an overhead trolley conveyor, able to move all types of loads over great distances at all elevations along complex paths. The load ranges can vary from a few kilograms to several hundred kilograms. The P&F system concept is based on a two rail system – one on top of the other – with a power chain on the top rail. On the lower rail, the free rail, the load devices are towed by the chain. This ability allows for the carrier trolley to be stopped, switched or diverted to other paths that can be powered or non-powered. The systems can be individually tailored according to our customers production requirements.

Floor Transport Systems

The sliding conveyor technology is suitable for transporting heavy goods placed on skids or pallets.

Our floor conveyor technology ensures an efficient and smooth handling of our customers' products. Our robust systems guarantee reliable and trouble-free operation at a low maintenance cost.

EMS Overhead Conveyor Systems

Electric Monorails Systems (EMS) are suspended transport systems, their trolleys are equipped with individual drives. Any position on a fixed rail system can be approached by using proximity switches or barcodes attached to the track. The system can be expanded with switch junctions and vertical lift stations.

Programmable Hoist Conveyor Systems

Programmable hoist or overhead crane systems are typically used in dip painting lines when multiple dip tanks are used one behind the other. Various programmable hoists transports a carrier/basket from the entrance of the system through each immersion stage and at the end drops it off on the curing oven conveyor chain.

Overhead Chain Conveyor Systems

Closed loop overhead chain conveyors are used for internal material flow in all areas of industry and commerce.

P&F systems provides the highest level of flexibility for chain conveyor systems. These chain system could be used where the conveyor network is spread over several floors, at fast transfer speed or with low and constant motion, products will be transported from zone to zone regardless of the process conditions.

Process Technology

Design, engineering, optimization, operation, control and management of processes for the sustainable, safe, fast and inexpensive conversion of materials into products in processes that are essentially related to surface treatment.

Surface Treatment Processes

  • Paint Spray Booths: A spray booth is the central component of a paint system. It is used to apply varnishes or coating materials with a wide variety of application techniques and degrees of efficiency
  • Inspection and rework lines with wooden floor
  • PVC underbody sealing lines
  • IR paint curing ovens
  • Convection curing ovens

Industrial Mechanical Engineering

Our engineering services are covering a wide range of application.

 Monitoring throughout the entire product life cycle, from the conception of the idea, with the focus on the detailed drawings, the way of manufacturing, the way of assembly and an easy maintenance service.

Applied Mechanical Design

  • Automation of conveyor and material handling solutions
  • Work benches
  • Heavy Duty Industrial Shelving
  • Protective guards for moving equipment (e.g. robots, conveyors)

Industrial Machining

Processes in which a machine or a tool is used to mold and remove excess material and begin to obtain the desired shape of a part.

Machinery Available Depending on the Needs of the Project

  • Conventional bench lathe
  • CNC lathe
  • Conventional milling machine
  • CNC milling machine
  • Keyway brush
  • Cutting with band saw
  • Plasma cutting
  • Shear cutting
  • Conventional bending machine
  • Vertical drilling machine

Welding Shop

Piece joining techniques, aided by the melting of metals (metal fusion), with an electric arc, gas flame or electron beam to build functional assemblies that are assembled in systems with a wide variety of applications.

Steel Construction

  • Metal structures
  • Railing
  • Beams for engine maintenance
  • Work decks

Design of auxiliary devices for the automobile production

  • Door hooks
  • Hooks to fix the hood lid
  • Fender mounting hooks
  • Design and manufacture of devices in general

Design of Civil Engineering Equipment

  • Vertical form work wall frames for
    concrete pouring for series production
  • Form work frames for concrete pouring
    of window panels
  • Other concrete wall production devices
  • Tentioning heads for French stair treads
  • Grids for beams
  • Residential projects

 Road Signs

  • Structure for traffic lights
  • Housings for speed measuring devices
en_US